#
\n# This is the main <b>Apache</b> HTTP server configuration file.  It contains the
\n# configuration directives that give the server its instructions.
\n# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
\n# In particular, see 
\n# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
\n# for a discussion of each configuration directive.
\n#
\n# Do NOT simply read the instructions in here without understanding
\n# what they do.  They're here only as hints or reminders.  If you are unsure
\n# consult the online docs. You have been warned.  
\n#
\n# Configuration and logfile names: If the filenames you specify for many
\n# of the server's control files begin with "/" (or "drive:/" for Win32), the
\n# server will use that explicit path.  If the filenames do *not* begin
\n# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
\n# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
\n# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" 
\n# will be interpreted as '/logs/access_log'.
\n#
\n# NOTE: Where filenames are specified, you must use forward slashes
\n# instead of backslashes (e.g., "c:/apache" instead of "c:\\apache").
\n# If a drive letter is omitted, the drive on which httpd.exe is located
\n# will be used by default.  It is recommended that you always supply
\n# an explicit drive letter in absolute paths to avoid confusion.
\n
\n#
\n# ServerRoot: The top of the directory tree under which the server's
\n# configuration, error, and log files are kept.
\n#
\n# Do not add a slash at the end of the directory path.  If you point
\n# ServerRoot at a non-local disk, be sure to specify a local disk on the
\n# Mutex directive, if file-based mutexes are used.  If you wish to share the
\n# same ServerRoot for multiple httpd daemons, you will need to change at
\n# least PidFile.
\n#
\nDefine SRVROOT "C:/xampp/apache"
\n
\nServerRoot "C:/xampp/apache"
\n
\n#
\n# Mutex: Allows you to set the mutex mechanism and mutex file directory
\n# for individual mutexes, or change the global defaults
\n#
\n# Uncomment and change the directory if mutexes are file-based and the default
\n# mutex file directory is not on a local disk or is not appropriate for some
\n# other reason.
\n#
\n# Mutex default:logs
\n
\n#
\n# Listen: Allows you to bind <b>Apache</b> to specific IP addresses and/or
\n# ports, instead of the default. See also the <VirtualHost>
\n# directive.
\n#
\n# Change this to Listen on specific IP addresses as shown below to 
\n# prevent <b>Apache</b> from glomming onto all bound IP addresses.
\n#
\n#Listen 12.34.56.78:80
\nListen 80
\n
\n#
\n# Dynamic Shared Object (DSO) Support
\n#
\n# To be able to use the functionality of a module which was built as a DSO you
\n# have to place corresponding `LoadModule' lines at this location so the
\n# directives contained in it are actually available _before_ they are used.
\n# Statically compiled modules (those listed by `httpd -l') do not need
\n# to be loaded here.
\n#
\n# Example:
\n# LoadModule foo_module modules/mod_foo.so
\n#
\nLoadModule access_compat_module modules/mod_access_compat.so
\nLoadModule actions_module modules/mod_actions.so
\nLoadModule alias_module modules/mod_alias.so
\nLoadModule allowmethods_module modules/mod_allowmethods.so
\nLoadModule asis_module modules/mod_asis.so
\nLoadModule auth_basic_module modules/mod_auth_basic.so
\n#LoadModule auth_digest_module modules/mod_auth_digest.so
\n#LoadModule auth_form_module modules/mod_auth_form.so
\n#LoadModule authn_anon_module modules/mod_authn_anon.so
\nLoadModule authn_core_module modules/mod_authn_core.so
\n#LoadModule authn_dbd_module modules/mod_authn_dbd.so
\n#LoadModule authn_dbm_module modules/mod_authn_dbm.so
\nLoadModule authn_file_module modules/mod_authn_file.so
\n#LoadModule authn_socache_module modules/mod_authn_socache.so
\n#LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so
\n#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
\nLoadModule authz_core_module modules/mod_authz_core.so
\n#LoadModule authz_dbd_module modules/mod_authz_dbd.so
\n#LoadModule authz_dbm_module modules/mod_authz_dbm.so
\nLoadModule authz_groupfile_module modules/mod_authz_groupfile.so
\nLoadModule authz_host_module modules/mod_authz_host.so
\n#LoadModule authz_owner_module modules/mod_authz_owner.so
\nLoadModule authz_user_module modules/mod_authz_user.so
\nLoadModule autoindex_module modules/mod_autoindex.so
\n#LoadModule brotli_module modules/mod_brotli.so
\n#LoadModule buffer_module modules/mod_buffer.so
\n#LoadModule cache_module modules/mod_cache.so
\n#LoadModule cache_disk_module modules/mod_cache_disk.so
\n#LoadModule cache_socache_module modules/mod_cache_socache.so
\n#LoadModule cern_meta_module modules/mod_cern_meta.so
\nLoadModule cgi_module modules/mod_cgi.so
\n#LoadModule charset_lite_module modules/mod_charset_lite.so
\n#LoadModule data_module modules/mod_data.so
\n#LoadModule dav_module modules/mod_dav.so
\n#LoadModule dav_fs_module modules/mod_dav_fs.so
\nLoadModule dav_lock_module modules/mod_dav_lock.so
\n#LoadModule dbd_module modules/mod_dbd.so
\n#LoadModule deflate_module modules/mod_deflate.so
\nLoadModule dir_module modules/mod_dir.so
\n#LoadModule dumpio_module modules/mod_dumpio.so
\nLoadModule env_module modules/mod_env.so
\n#LoadModule expires_module modules/mod_expires.so
\n#LoadModule ext_filter_module modules/mod_ext_filter.so
\n#LoadModule file_cache_module modules/mod_file_cache.so
\n#LoadModule filter_module modules/mod_filter.so
\n#LoadModule http2_module modules/mod_http2.so
\nLoadModule headers_module modules/mod_headers.so
\n#LoadModule heartbeat_module modules/mod_heartbeat.so
\n#LoadModule heartmonitor_module modules/mod_heartmonitor.so
\n#LoadModule ident_module modules/mod_ident.so
\n#LoadModule imagemap_module modules/mod_imagemap.so
\nLoadModule include_module modules/mod_include.so
\nLoadModule info_module modules/mod_info.so
\nLoadModule isapi_module modules/mod_isapi.so
\n#LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
\n#LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
\n#LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
\n#LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
\n#LoadModule ldap_module modules/mod_ldap.so
\n#LoadModule logio_module modules/mod_logio.so
\nLoadModule log_config_module modules/mod_log_config.so
\n#LoadModule log_debug_module modules/mod_log_debug.so
\n#LoadModule log_forensic_module modules/mod_log_forensic.so
\n#LoadModule lua_module modules/mod_lua.so
\nLoadModule cache_disk_module modules/mod_cache_disk.so
\n#LoadModule macro_module modules/mod_macro.so
\n#LoadModule md_module modules/mod_md.so
\nLoadModule mime_module modules/mod_mime.so
\n#LoadModule mime_magic_module modules/mod_mime_magic.so
\nLoadModule negotiation_module modules/mod_negotiation.so
\nLoadModule proxy_module modules/mod_proxy.so
\nLoadModule proxy_ajp_module modules/mod_proxy_ajp.so
\n#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
\n#LoadModule proxy_connect_module modules/mod_proxy_connect.so
\n#LoadModule proxy_express_module modules/mod_proxy_express.so
\n#LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
\n#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
\n#LoadModule proxy_hcheck_module modules/mod_proxy_hcheck.so
\n#LoadModule proxy_html_module modules/mod_proxy_html.so
\n#LoadModule proxy_http_module modules/mod_proxy_http.so
\n#LoadModule proxy_http2_module modules/mod_proxy_http2.so
\n#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
\n#LoadModule proxy_uwsgi_module modules/mod_proxy_uwsgi.so
\n#LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
\n#LoadModule ratelimit_module modules/mod_ratelimit.so
\n#LoadModule reflector_module modules/mod_reflector.so
\n#LoadModule remoteip_module modules/mod_remoteip.so
\n#LoadModule request_module modules/mod_request.so
\n#LoadModule reqtimeout_module modules/mod_reqtimeout.so
\nLoadModule rewrite_module modules/mod_rewrite.so
\n#LoadModule sed_module modules/mod_sed.so
\n#LoadModule session_module modules/mod_session.so
\n#LoadModule session_cookie_module modules/mod_session_cookie.so
\n#LoadModule session_crypto_module modules/mod_session_crypto.so
\n#LoadModule session_dbd_module modules/mod_session_dbd.so
\nLoadModule setenvif_module modules/mod_setenvif.so
\n#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
\n#LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
\n#LoadModule socache_dbm_module modules/mod_socache_dbm.so
\n#LoadModule socache_memcache_module modules/mod_socache_memcache.so
\n#LoadModule socache_redis_module modules/mod_socache_redis.so
\nLoadModule socache_shmcb_module modules/mod_socache_shmcb.so
\n#LoadModule speling_module modules/mod_speling.so
\nLoadModule ssl_module modules/mod_ssl.so
\nLoadModule status_module modules/mod_status.so
\n#LoadModule substitute_module modules/mod_substitute.so
\n#LoadModule unique_id_module modules/mod_unique_id.so
\n#LoadModule userdir_module modules/mod_userdir.so
\n#LoadModule usertrack_module modules/mod_usertrack.so
\nLoadModule version_module modules/mod_version.so
\n#LoadModule vhost_alias_module modules/mod_vhost_alias.so
\n#LoadModule watchdog_module modules/mod_watchdog.so
\n#LoadModule xml2enc_module modules/mod_xml2enc.so
\n
\n<IfModule unixd_module>
\n#
\n# If you wish httpd to run as a different user or group, you must run
\n# httpd as root initially and it will switch.  
\n#
\n# User/Group: The name (or #number) of the user/group to run httpd as.
\n# It is usually good practice to create a dedicated user and group for
\n# running httpd, as with most system services.
\n#
\nUser daemon
\nGroup daemon
\n
\n</IfModule>
\n
\n# 'Main' server configuration
\n#
\n# The directives in this section set up the values used by the 'main'
\n# server, which responds to any requests that aren't handled by a
\n# <VirtualHost> definition.  These values also provide defaults for
\n# any <VirtualHost> containers you may define later in the file.
\n#
\n# All of these directives may appear inside <VirtualHost> containers,
\n# in which case these default settings will be overridden for the
\n# virtual host being defined.
\n#
\n
\n#
\n# ServerAdmin: Your address, where problems with the server should be
\n# e-mailed.  This address appears on some server-generated pages, such
\n# as error documents.  e.g. admin@your-domain.com
\n#
\nServerAdmin postmaster@localhost
\n
\n#
\n# ServerName gives the name and port that the server uses to identify itself.
\n# This can often be determined automatically, but we recommend you specify
\n# it explicitly to prevent problems during startup.
\n#
\n# If your host doesn't have a registered DNS name, enter its IP address here.
\n#
\nServerName localhost:80
\n
\n#
\n# Deny access to the entirety of your server's filesystem. You must
\n# explicitly permit access to web content directories in other 
\n# <Directory> blocks below.
\n#
\n<Directory />
\n    AllowOverride none
\n    Require all denied
\n</Directory>
\n
\n#
\n# Note that from this point forward you must specifically allow
\n# particular features to be enabled - so if something's not working as
\n# you might expect, make sure that you have specifically enabled it
\n# below.
\n#
\n
\n#
\n# DocumentRoot: The directory out of which you will serve your
\n# documents. By default, all requests are taken from this directory, but
\n# symbolic links and aliases may be used to point to other locations.
\n#
\nDocumentRoot "C:/xampp/htdocs"
\n<Directory "C:/xampp/htdocs">
\n    #
\n    # Possible values for the Options directive are "None", "All",
\n    # or any combination of:
\n    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
\n    #
\n    # Note that "MultiViews" must be named *explicitly* --- "Options All"
\n    # doesn't give it to you.
\n    #
\n    # The Options directive is both complicated and important.  Please see
\n    # http://httpd.apache.org/docs/2.4/mod/core.html#options
\n    # for more information.
\n    #
\n    Options Indexes FollowSymLinks Includes ExecCGI
\n
\n    #
\n    # AllowOverride controls what directives may be placed in .htaccess files.
\n    # It can be "All", "None", or any combination of the keywords:
\n    #   AllowOverride FileInfo AuthConfig Limit
\n    #
\n    AllowOverride All
\n
\n    #
\n    # Controls who can get stuff from this server.
\n    #
\n    Require all granted
\n</Directory>
\n
\n#
\n# DirectoryIndex: sets the file that <b>Apache</b> will serve if a directory
\n# is requested.
\n#
\n<IfModule dir_module>
\n    DirectoryIndex index.php index.pl index.cgi index.asp index.shtml index.html index.htm \\
\n                   default.php default.pl default.cgi default.asp default.shtml default.html default.htm \\
\n                   home.php home.pl home.cgi home.asp home.shtml home.html home.htm
\n</IfModule>
\n
\n#
\n# The following lines prevent .htaccess and .htpasswd files from being 
\n# viewed by Web clients. 
\n#
\n<Files ".ht*">
\n    Require all denied
\n</Files>
\n
\n#
\n# ErrorLog: The location of the error log file.
\n# If you do not specify an ErrorLog directive within a <VirtualHost>
\n# container, error messages relating to that virtual host will be
\n# logged here.  If you *do* define an error logfile for a <VirtualHost>
\n# container, that host's errors will be logged there and not here.
\n#
\nErrorLog "logs/error.log"
\n
\n#
\n# LogLevel: Control the number of messages logged to the error_log.
\n# Possible values include: debug, info, notice, warn, error, crit,
\n# alert, emerg.
\n#
\nLogLevel warn
\n
\n<IfModule log_config_module>
\n    #
\n    # The following directives define some format nicknames for use with
\n    # a CustomLog directive (see below).
\n    #
\n    LogFormat "%h %l %u %t \\"%r\\" %>s %b \\"%{Referer}i\\" \\"%{User-Agent}i\\"" combined
\n    LogFormat "%h %l %u %t \\"%r\\" %>s %b" common
\n
\n    <IfModule logio_module>
\n      # You need to enable mod_logio.c to use %I and %O
\n      LogFormat "%h %l %u %t \\"%r\\" %>s %b \\"%{Referer}i\\" \\"%{User-Agent}i\\" %I %O" combinedio
\n    </IfModule>
\n
\n    #
\n    # The location and format of the access logfile (Common Logfile Format).
\n    # If you do not define any access logfiles within a <VirtualHost>
\n    # container, they will be logged here.  Contrariwise, if you *do*
\n    # define per-<VirtualHost> access logfiles, transactions will be
\n    # logged therein and *not* in this file.
\n    #
\n    #CustomLog "logs/access.log" common
\n
\n    #
\n    # If you prefer a logfile with access, agent, and referer information
\n    # (Combined Logfile Format) you can use the following directive.
\n    #
\n    CustomLog "logs/access.log" combined
\n</IfModule>
\n
\n<IfModule alias_module>
\n    #
\n    # Redirect: Allows you to tell clients about documents that used to 
\n    # exist in your server's namespace, but do not anymore. The client 
\n    # will make a new request for the document at its new location.
\n    # Example:
\n    # Redirect permanent /foo http://www.example.com/bar
\n
\n    #
\n    # Alias: Maps web paths into filesystem paths and is used to
\n    # access content that does not live under the DocumentRoot.
\n    # Example:
\n    # Alias /webpath /full/filesystem/path
\n    #
\n    # If you include a trailing / on /webpath then the server will
\n    # require it to be present in the URL.  You will also likely
\n    # need to provide a <Directory> section to allow access to
\n    # the filesystem path.
\n
\n    #
\n    # ScriptAlias: This controls which directories contain server scripts. 
\n    # ScriptAliases are essentially the same as Aliases, except that
\n    # documents in the target directory are treated as applications and
\n    # run by the server when requested rather than as documents sent to the
\n    # client.  The same rules about trailing "/" apply to ScriptAlias
\n    # directives as to Alias.
\n    #
\n    ScriptAlias /cgi-bin/ "C:/xampp/cgi-bin/"
\n
\n</IfModule>
\n
\n<IfModule cgid_module>
\n    #
\n    # ScriptSock: On threaded servers, designate the path to the UNIX
\n    # socket used to communicate with the CGI daemon of mod_cgid.
\n    #
\n    #Scriptsock cgisock
\n</IfModule>
\n
\n#
\n# "C:/xampp/cgi-bin" should be changed to whatever your ScriptAliased
\n# CGI directory exists, if you have that configured.
\n#
\n<Directory "C:/xampp/cgi-bin">
\n    AllowOverride All
\n    Options None
\n    Require all granted
\n</Directory>
\n
\n<IfModule headers_module>
\n    #
\n    # Avoid passing HTTP_PROXY environment to CGI's on this or any proxied
\n    # backend servers which have lingering "httpoxy" defects.
\n    # 'Proxy' request header is undefined by the IETF, not listed by IANA
\n    #
\n    RequestHeader unset Proxy early
\n</IfModule>
\n
\n<IfModule mime_module>
\n    #
\n    # TypesConfig points to the file containing the list of mappings from
\n    # filename extension to MIME-type.
\n    #
\n    TypesConfig conf/mime.types
\n
\n    #
\n    # AddType allows you to add to or override the MIME configuration
\n    # file specified in TypesConfig for specific file types.
\n    #
\n    #AddType application/x-gzip .tgz
\n    #
\n    # AddEncoding allows you to have certain browsers uncompress
\n    # information on the fly. Note: Not all browsers support this.
\n    #
\n    #AddEncoding x-compress .Z
\n    #AddEncoding x-gzip .gz .tgz
\n    #
\n    # If the AddEncoding directives above are commented-out, then you
\n    # probably should define those extensions to indicate media types:
\n    #
\n    AddType application/x-compress .Z
\n    AddType application/x-gzip .gz .tgz
\n
\n    #
\n    # AddHandler allows you to map certain file extensions to "handlers":
\n    # actions unrelated to filetype. These can be either built into the server
\n    # or added with the Action directive (see below)
\n    #
\n    # To use CGI scripts outside of ScriptAliased directories:
\n    # (You will also need to add "ExecCGI" to the "Options" directive.)
\n    #
\n    AddHandler cgi-script .cgi .pl .asp
\n
\n    # For type maps (negotiated resources):
\n    #AddHandler type-map var
\n
\n    #
\n    # Filters allow you to process content before it is sent to the client.
\n    #
\n    # To parse .shtml files for server-side includes (SSI):
\n    # (You will also need to add "Includes" to the "Options" directive.)
\n    #
\n    AddType text/html .shtml
\n    AddOutputFilter INCLUDES .shtml
\n</IfModule>
\n
\n#
\n# The mod_mime_magic module allows the server to use various hints from the
\n# contents of the file itself to determine its type.  The MIMEMagicFile
\n# directive tells the module where the hint definitions are located.
\n#
\n<IfModule mime_magic_module>
\n    #
\n    # The mod_mime_magic module allows the server to use various hints from the
\n    # contents of the file itself to determine its type.  The MIMEMagicFile
\n    # directive tells the module where the hint definitions are located.
\n    #
\n    MIMEMagicFile "conf/magic"
\n</IfModule>
\n
\n
\n#
\n# Customizable error responses come in three flavors:
\n# 1) plain text 2) local redirects 3) external redirects
\n#
\n# Some examples:
\n#ErrorDocument 500 "The server made a boo boo."
\n#ErrorDocument 404 /missing.html
\n#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
\n#ErrorDocument 402 http://www.example.com/subscription_info.html
\n#
\n
\n#
\n# MaxRanges: Maximum number of Ranges in a request before
\n# returning the entire resource, or one of the special
\n# values 'default', 'none' or 'unlimited'.
\n# Default setting is to accept 200 Ranges.
\n#MaxRanges unlimited
\n
\n#
\n# EnableMMAP and EnableSendfile: On systems that support it, 
\n# memory-mapping or the sendfile syscall may be used to deliver
\n# files.  This usually improves server performance, but must
\n# be turned off when serving from networked-mounted 
\n# filesystems or if support for these functions is otherwise
\n# broken on your system.
\n# Defaults: EnableMMAP On, EnableSendfile Off
\n#
\n#EnableMMAP off
\n#EnableSendfile off
\n
\n# Supplemental configuration
\n#
\n# The configuration files in the conf/extra/ directory can be 
\n# included to add extra features or to modify the default configuration of 
\n# the server, or you may simply copy their contents here and change as 
\n# necessary.
\n
\n# Server-pool management (MPM specific)
\nInclude conf/extra/httpd-mpm.conf
\n
\n# Multi-language error messages
\n#Include conf/extra/httpd-multilang-errordoc.conf
\n
\n# Fancy directory listings
\nInclude conf/extra/httpd-autoindex.conf
\n
\n# Language settings
\nInclude conf/extra/httpd-languages.conf
\n
\n# User home directories
\nInclude conf/extra/httpd-userdir.conf
\n
\n# Real-time info on requests and configuration
\nInclude conf/extra/httpd-info.conf
\n
\n# Virtual hosts
\nInclude conf/extra/httpd-vhosts.conf
\n
\n# Local access to the <b>Apache</b> HTTP Server Manual
\n#Include conf/extra/httpd-manual.conf
\n
\n# Distributed authoring and versioning (WebDAV)
\n#Attention! WEB_DAV is a security risk without a new userspecific configuration for a secure authentifcation 
\n#Include conf/extra/httpd-dav.conf
\n
\n# Various default settings
\n#Include conf/extra/httpd-default.conf
\n# Implements a proxy/gateway for <b>Apache</b>.
\nInclude "conf/extra/httpd-proxy.conf"
\n# Various default settings
\nInclude "conf/extra/httpd-default.conf"
\n# XAMPP settings
\nInclude "conf/extra/httpd-xampp.conf"
\n
\n# Configure mod_proxy_html to understand HTML4/XHTML1
\n<IfModule proxy_html_module>
\nInclude conf/extra/proxy-html.conf
\n</IfModule>
\n
\n# Secure (SSL/TLS) connections
\nInclude conf/extra/httpd-ssl.conf
\n#
\n# Note: The following must must be present to support
\n#       starting without SSL on platforms with no /dev/random equivalent
\n#       but a statically compiled-in mod_ssl.
\n#
\n<IfModule ssl_module>
\nSSLRandomSeed startup builtin
\nSSLRandomSeed connect builtin
\n</IfModule>
\n
\n# XAMPP: We disable operating system specific optimizations for a listening
\n# socket by the http protocol here. IE 64 bit make problems without this.
\n
\nAcceptFilter http none
\nAcceptFilter https none
\n# AJP13 Proxy
\n<IfModule mod_proxy.c>
\n<IfModule mod_proxy_ajp.c>
\nInclude "conf/extra/httpd-ajp.conf"
\n</IfModule>
\n</IfModule>
\n